millennium falcon (Filament Painting)
millennium falcon (Filament Painting)
Print Profile(3)
Description
Filament painted print made using HueForge - Filament swaps ONLY, no mmu/ams required
4 colour HueForge model. ‘Millennium Falcon’ filament painting made using Sunlu pla+ filaments
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Sunlu PLA+ Black Transmission Distance: 0.6
PLA Sunlu PLA+ Grey Transmission Distance: 2
PLA Sunlu PLA+ Skin Transmission Distance: 6
PLA Sunlu PLA+ White Transmission Distance: 6
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Grey
At layer #8 (0.72mm) swap to Skin
At layer #12 (1.04mm) swap to White for the rest.
This is a filament blending model, I would recommend trying to match the td as close as possible if not using the exact filaments to get the best results
Use the exact numbers in your slicer to match up properly.
model can be resized but keep the ‘Z’ height the same, designed to print with 0.4 nozzle
Comment & Rating (0)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
