Print in 3D

cover

view.png

simple_vase.png

sketch.png

plate_1.png

printed.png

This profile changed the following:<ul><li>5 Bottom shell layers</li><li>Concentric infill with 100% density</li><li>reduced speeds for better overhang quality (outer wall = 100 mm/s and Inner wall = 50 mm/s)</li></ul>Set the AUX fan to 10% if printing on X1C, P1S with door open improved the overall quality for me.

0.2mm layer, 2 walls, 100% infill

One of our kids needed a vase for his flowers made out of bricks. I took the opportunity to deepen my knowledge of FreeCAD. The result is a simple vase, 205mm high, 90mm wide and with an opening of 24mm.&nbsp;

Simple Vase

ASIA

Print Profile(1)

Description

Comment & Rating (0)

License

Related Models