IF YOU LIKE THIS MODEL GIVE ME A “THUMBS-UP” SO MORE PEOPLE CAN DISCOVER THIS MODEL. THANKS
If you need to tighten your timingbelts in case they got a little loose or your printer is making strange noise because of loose timingbelts,
or just for regular maintenance, this little helper will guide you. (need to print twice to have a pair each)
Steps as followed:
-loosen the 2x2 screws eaxh side. (just loosen! do nut fully unscrew!)
-move the Toolheadfrom the back all the way to the front for setteling the belt.
-measure wich of the distancing plates fits now and add about 0,6-0,8mm.
(BambuLab suggests to add a max of 1.0mm each side wich is quiet a lot. If 4.0mm fits loose go for 4.6-4.8mm)
-take the distancing plate and plug it in like in the Picture.
-repeat on the other side.
-if done thighten the screws back in (with distance plates still in there)
-remove the plates
-at first start you need to do a Calibration cycle
Thats it. Now your timing belts are back on track!
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.