The resin drip tray for the Phrozen Mini8K and Mini8KS has three purposes:
1.After printing, the finished product can be placed on the tray to help recycle unreacted resin and reduce the consumption of cleaning agents.
2.When used on commercially available 3-liter cold water jugs, the grooved design on top of the printed part allows the resin to slowly drip back into the jug for recycling.
3.When the tray is placed on a table, it can serve as a support stand.
============================================
Phrozen Mini8K和Mini8KS的料槽樹酯滴料架有三種用途:
1.列印完畢的成品可以放置於料槽上,這樣做有助於回收未反應的樹酯,同時減少清洗劑的消耗。
2.在市售的三公升冷水壺上使用時,列印件上方的溝槽設計可以使樹酯慢慢滴回冷水壺中進行回收。
3.當料槽放置於桌面上時,此架可作為支撐台使用。