50x150 Bookmark Frames (1-4 Bookmarks)

Bookmark Display Frames for 50x150 Bookmarks.  

*SOME MINOR GLUEING COULD BE REQUIRED DEPENDING HOW YOU WANT TO USE THEM*

For 1, 2, 3 or 4 Bookmarks

If you want 5 or more bookmark frames I have released a design that requires some gluing.  Each part has a thin edges on the outside to allow for combined two together so all the frame edges are the same size. You can find it here:

https://makerworld.com/en/models/1122211#profileId-1120879

Commercial License to sell my designs can be found here:

https://www.patreon.com/c/DoubleJDesigns3D

___________________________________________________

This design was inspired by some really great designers on marketplace who made me realize I have a love for all things bookmarks.

I found myself very drawn to unique art that are Hueforges and with that the small bookmark versions.  I have printed many of them since purchasing my printer but they all end up in a box out of sight.  Until now!  I present to you the 50x150 bookmark frame for displaying your favorite bookmarks.

This design allows you to put your bookmarks on your wall or on a shelf and easily remove the bookmark you want to use in your latest novel adventure.  Or simply put them up on your wall for everyone to appreciate.  Quickly change them out for new ones or for different holidays.  Some bookmarks may not fit on the A1.

Simply slide the bookmark up and out the top of the bookmark and replace it with the new one.  You don't even need to remove it from the wall.  They bookmarks are secure and will not fall out (unless you try to display them upside down :))

The bookmarks are printed using supports to allow for a track that the bookmarks slide into. These are fairly easy to remove. You may have some minor issues at the bottom of each frame at first, but its an easy remove once you get the hang of it.  If some get stuck, press at the thinnest part of the tree attached to the frame. This will “crack” the trees from the frame and can be more easily removed.

For wall display, 2 inserts are provided that will fit into a cut out opening at the top of the bookmark.  One insert includes a hole for a nail and the other is to fill in the remaining cutouts.  Not all cutouts need to be filled in, most are not necessary unless your OCD is as bad as mine and you just want it to look complete.  The only ones you need are the center one or the outsides for proper balance on the wall.  PLEASE SEE ALL PHOTOS FOR REFERENCE.

Highly recommend adhesive that is made with Cyanoacrylate as it will not leave white residue on the prints after it dries.

BOOKMARKS USED IN THE PHOTOS CAN BE FOUND AT THE FOLLOWING PLACES: 

NHL - I made those and they will be release these over the next few days/weeks.  Please follow me for updates as they are released.

Deadpool and Wolverine  - https://makerworld.com/en/models/554332#profileId-472959

Mario - https://makerworld.com/en/models/570805#profileId-490748

(thank you to Canadian Gamer for permission to use his Mario and superhero designs in the photos.)