OREO (Biscuit / Cookie) Whistle
Print Profile(2)
Bill of Materials
Description
OREO Biscuit Whistle - 2 VERSIONS AVAILABLE
I would like to introduce you to my little OREO Biscuit Whistle.
It has a diameter of 4cm and a thickness of 13mm. There is an eyelet at the top so that you can attach it to the key ring.
ATTENTION BOTH VERSIONS ARE VERY LOUD !!!
The whistle can be attached in a variety of ways:
- As a key ring: It is always ready to hand.
- On your handbag: An inconspicuous accessory with great effect.
- Around the neck: Particularly practical when jogging or going for a walk.
- On your belt: Another way to carry the whistle inconspicuously.
- In your jacket pocket: The whistle is also quickly to hand here.
It is EXTREMELY loud! Be careful :-)
Please print these as on the printing plate so that you get a good result.Don't forget to calibrate the printer and filament for optimum results
Now have fun whistling
A layer height of less than 0.2mm is not recommended.
The filaments I use are listed
It works great for me.
Boost Me (for free)
If you like it - boost it
If you like my work/project consider supporting me with these options:
- leave a like
- leave a comment
- download the file
- or buy me a Coffee
- check out my Patreon Page!
This article/post/text or the print profile as well as the finished print may not be used for commercial purposes.
If you wish to sell the physical 3D prints of my designs commercially
or use the LICENSE here on MAKER WORLD
• Obtain a Commercial Licence
Have fun printing
TBG
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (30)