These pieces allow you to build a garden bed cover using nothing but straight cut timber. No angles to worry about as the printed parts deal with all the complexity. It also includes a hinge so you can lift it from one side.

This design uses:

• 42 x 22mm timber (I used treated pine)
• Some 8g x 25mm stitching screws
• A length of 14x4mm cable feeding tape
• Some netting
• Staples to hold the net in place

https://www.bunnings.com.au/macsim-8g-x-25mm-stitch-button-screws-jar-200-pack_p0164925

https://www.bunnings.com.au/poly-eiger-4mm-3-6m-yellow-poly-cable-feeder_p4430566

Dimensions I used for each triangle end piece of a 600mm wide garden bed are 516mm length for the base and 457mm for the sides.

I printed in PETG.