X1C Chamber Heater Inlet Cover

X1C Chamber Heater Inlet Duct.

If you print and use my chamber heater design, this inlet cover will help circulate air around the box pulling air from the top and pushing it out the bottom. The build platen in the chamber creates a barrier and creates a temperature differential between the top and bottom of the chamber. This pulls air from the top and pushes it out the bottom. This allows the hot air from the bottom to more rapidly flow up around the build plate and keep the box a more consistent temperature. Installation requires a M5 tap or 10-32 SAE tap to tap some threads in the fan housing. Install your choice of hardware. You could probably also use some self tapping screws, but I did not try this approach. 

Link to the Build for the X1C Heater:

https://makerworld.com/en/models/1078432#profileId-1069730

Legal Disclamer: 3D Printed Model

USE AT YOUR OWN RISK

By downloading, printing, or using any 3D model provided, you acknowledge and accept that you do so at your own risk. The creator of this model makes no warranties or guarantees regarding its safety, functionality, durability, or suitability for any specific purpose.

The creator assumes no liability for:

    •    Any damage to your 3D printer or other equipment.

    •    Personal injury, property damage, or legal issues resulting from the use or misuse of the model.

    •    Any modifications or alterations made to the original design.

It is your responsibility to ensure proper use and safety precautions, including:

    •    Verifying the model’s design for structural integrity.

    •    Using appropriate materials and print settings.

    •    Complying with local laws and regulations regarding 3D-printed items.