Bugs Bunny

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Swap Instructions:
    Start with Black
    At layer #9 (0.8mm) swap to Blue Gray
    At layer #14 (1.2mm) swap to Grey
    At layer #17 (1.44mm) swap to White for the rest.

Try a dark red in place of the blue gray should turn out nice.