Big Balls

Love me or hate me, but I tribute, in the style of South Park, “Big Balls”, one of the 19 year old genius's finding all the money laundering going on in. I do not know the race of the young man but you can adjust the points of color changes and layer levels, to accommodate the style you want. If you have HueForge, I include the hfp project file in the zip of all file, so you can adjust to the colors and filament of your liking. No HueForge? You will have to set layer pauses described below, and change filament at those pauses. I am sure it will print with a .4mm nozzle, but this is set for .2mm nozzle. Adjust as needed.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 100x100mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
    PETG Black Transmission Distance: 0.3
    PETG Red Transmission Distance: 6
    PETG Yellow Transmission Distance: 6
    PETG White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #11 (0.96mm) swap to Red. If no AMS, set first pause here and swap to Red manually.
    At layer #19 (1.6mm) swap to Yellow. If no AMS, set second pause here and swap to Yellow manually.
    At layer #21 (1.76mm) swap to White for the rest. If no AMS, set last pause here and swap to White manually.