A1_Cable securing for the tool head V2.0
Copyright Claim
A1_Cable securing for the tool head V2.0
Boost
333
593
371
Print Profile(6)
(V2.1) 0.2mm layer
Designer
26 min
1 plate
(V2.0) 0.2mm layer
Designer
26 min
1 plate
V2.1 ASeries - 0.2mm layer, 3 walls, 15% infill
26 min
1 plate
![[Printable on Mini]: 0.2mm layer, 3 walls, 15% infill](https://makerworld.bblmw.com/makerworld/model/US624c2239777f03/design/2023-12-29_006bece94bc39.jpg?x-oss-process=image/resize,w_100/format,webp)
[Printable on Mini]: 0.2mm layer, 3 walls, 15% infill
26 min
1 plate
Click to see more
Boost
333
593
371
17
1.5 k
1.2 k
Released
Description
Version 2.1 added with a modified peg for people experiencing issues with complete insertion of the holder.
In case version 2.1 is loose in your case, use the original version 2.0.
New version of securing the printer head cable to prevent snagging on the Z-axis structure.
The cable is routed further away from the Z-axis.
The overall design has been modified for a more aesthetically pleasing appearance.
Printed using standard settings with PLA.
Comment & Rating (371)
All
Nice part thank you for the work.
Printed just fine from Bambu Studio.
(Edited)
The designer has replied
3
Reply
Hello, thank you for the comment.
I'm unable to replicate your issue.
Tomorrow, I'll try uploading a new print profile
(Edited)1
Reply
Replying to @Deviian
this is just on my side. The app is giving me the same thing on every print.
0
Reply
Print Profile
(V2.0) 0.2mm layer
It printed well and fast. It seems the fit is just a bit too tight and didn't go all the way inside. Still, it fits the aesthetic of the machine and we can barely see the little gap.
The designer has replied
0
Reply
Can I slightly adjust the dimensions, but the model was designed to hold firmly when squeezed. Perhaps, reducing the Flow slightly might help.
I adjusted the dimension by 0.2 mm, currently printing. Based on the result, I'll upload the STL file accordingly.
(Edited)1
Reply
Replying to @Deviian
The peg was eventually reduced by 0.1 mm, and it fits much better now. So, give it a try. I've uploaded a new print profile and the STL file.
(Edited)2
Reply
Replying to @Deviian
Thank you very much for following up on my comment. I don't think I will reprint it not to waste filament, because the gap is not that bad and I believe this serves its purpose very well. Again, thank you for sharing your design
(Edited)1
Reply
Print Profile
(V2.1) 0.2mm layer
a bit loose on the slot but still nice
The designer has replied
0
Reply
If a bit loose, print version 2.0.
0
Reply
TOP! Vielen Dank.
1
Reply
Should have been part of the production. Should definitely be one of your first prints.
1
Reply
Print Profile
(V2.0) 0.2mm layer
Printed in white PETG and it looks like it was an original piece of the printer. works great. No more fear that the cable might get tangled. 😄
1
Reply
Print Profile
(V2.1) 0.2mm layer
Very good
1
Reply
Print Profile
(V2.0) 0.2mm layer
Perfect! Just what was needed for the A1
1
Reply
Print Profile
(V2.0) 0.2mm layer
simple, fast and perfect fit. thank you!
1
Reply
Print Profile
V2.1 ASeries - 0.2mm layer, 3 walls, 15% infill
worked great. one of my first prints on a new A1.
1
Reply
License
This user content is licensed under a
Creative Commons AttributionRelated Models
© 2024 MakerWorld