This is an add-on modification for my Toroidal Launcher that is designed to drop-in and replace the default gears used for the first two stages. This gearset provides a 1:7 ratio and can be used to increase the overall gear ratio resulting in higher output speed at the cost of more required effort.
Specifications
1:7 gear ratio
Sun gear: 12 teeth
Planet gear: 30 teeth
Micro-drive: 4mm
Assembly
When using this gearset as the middle stage use the included collar to mate the output with the next stage as shown below:
When using this gearset as the output stage use the included capped collar to give the necessary extra clearance as shown below:
Printing Tips
The included print profile adjusts several of the standard settings and is what I've found works the best for speed and quality when printing gears.
Arachne wall generator
25% infill, 5 bottom/top walls
75 mm/s inner and outer wall speed
Related Designs
This design is part of a collection of modifications for my Toroidal Launcher design and allows users to customize the launcher to their liking.
it works very well. ai would not recommend stacking multiple of this particular gear set in the same machine it will become very hard to rotate and launch the propellers but this print is great still.