This is a very old model I created in 2015 and imported from my Thingyverse profile (https://www.thingiverse.com/TheZerschmetterling). Maybe some links are broken or not up to date. If you have any questions do not hesistate to ask.
This is a remix of the FireFly Version and an alternative frame for the Blade NanoQX (also FPV).
It fits the original NQX Cam or the additional Spektrum Micro Cam.
Its available for 6mm, 7mm and 8.5mm Motors.
You can bend the camera holder if you heat it up a bit, but be careful.
Frame size is at ~110 mm diagonal (m2m) and about 9 x 9 cm in length and width.
Frame weighs between 6g and 7g.
Motormounts:
Motors 6mm:
Motors 7mm:
Motors 8.5mm:
Flight Control:
(for a proper fit, you should remove the motor plugs and solder the motors directly to the board):
Cam and vTx:
Rotors:
Energy:
If you have questions, don't be shy. :)