Screwable tent peg
Copyright Claim
Screwable tent peg
Boost
26
50
13
Print Profile(2)
PLA_Version 9mm hole|0.2mm layer, 3 walls, 15% infill
Designer
23 min
1 plate
ASA_Version 9mm hole|0.2mm layer, 3 walls, 15% infill
Designer
19 min
1 plate
Open in Bambu Studio
Boost
26
50
13
3
84
91
Released
Description
The model paired with a long 8mm wood screw and a washer, or a washer-head screw, can be used as a screwable peg for a tent.
It should be noted that if the component is 3D printed using PLA+, it may not be suitable for prolonged outdoor use, and it's not particularly heat-resistant. During strong winds, attention should be paid to the stability of the component.
The ASA version should not have any issues with moisture and UV radiation.
Comment & Rating (13)
All
Boosted
Print Profile
PLA_Version 9mm hole|0.2mm layer, 3 walls, 15% infill
printed great in pla-cf, thanks for the efforts
1
Reply
Print Profile
ASA_Version 9mm hole|0.2mm layer, 3 walls, 15% infill
Druck läuft ohne Probleme durch, die Teile sind super. Vielen Dank für das bereitstellen der Datei. Habe sie jetzt immer im Camper dabei.
1
Reply
Print Profile
ASA_Version 9mm hole|0.2mm layer, 3 walls, 15% infill
In PETG gedruckt. Supersache
1
Reply
Print Profile
ASA_Version 9mm hole|0.2mm layer, 3 walls, 15% infill
Gedruckt mit Sunlu Petg in weiß. Infill 40%. Passen perfekt zu den Schrauben.
(Edited)
1
Reply
Print Profile
PLA_Version 9mm hole|0.2mm layer, 3 walls, 15% infill
klasse, die nächste Campingsaison kann kommen. Danke für die Vorlage
1
Reply
Boosted
Needed some and you had already created it so Thanks
1
Reply
Boosted
Print Profile
PLA_Version 9mm hole|0.2mm layer, 3 walls, 15% infill
0
Reply
Print Profile
ASA_Version 9mm hole|0.2mm layer, 3 walls, 15% infill
0
Reply
Print Profile
PLA_Version 9mm hole|0.2mm layer, 3 walls, 15% infill
0
Reply
Print Profile
PLA_Version 9mm hole|0.2mm layer, 3 walls, 15% infill
0
Reply
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld