Jujutsu Kaisen Satoru - HueForge
Print Profile(2)
Description
If you enjoyed this consider putting a coin in my jar maaybee? :D
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Silver Transmission Distance: 0.5
PETG JAYO White Transmission Distance: 6
Swap Instructions:
Start with Charcoal
At layer #3 (0.32mm) swap to Blue Gray
At layer #12 (1.04mm) swap to Silver
At layer #18 (1.52mm) swap to White for the rest.
Comment & Rating (6)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
