Rose by PolisLBC

PolisLBC

Household>Decor

Print Profile(1)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

1.9 h

1 plate

4.1(72)

Open in Bambu Studio

Boost

711

1212

1.9 k

763

Released

Description

Rose decoration.

Usage and Recommendations:

Print Settings: Suitable for beginners.
Recommended Colors: Neutral tones like white, beige, or light gray work great for a minimalist look. Bright colors such as orange or gold can add a more vibrant and eye-catching effect.
Supports: Yes, in my case used tree supports, angle 25 %
Material: PLA or any standard filament works well for this piece. For added sophistication, consider using matte or silk PLA.
Post-Processing: Light sanding and optional painting can enhance its overall appearance.
Tips: Be very careful when removing supports, specialy on the leafs.

rose

decor

Comment & Rating (88)

@user_1887500174

New to 3d printing, did this K2 Plus with tree support 23 hours.

@user_3241707169

Print Profile

0.2mm layer, 2 walls, 15% infill

something wasn't right

@Denn

you used supports?

@user_3241707169

Replying to @Denn :

I didn't know that it wouldn't have supports, unless I used the computer

@Jojacky105

Print Profile

0.2mm layer, 2 walls, 15% infill

Printed good but Supports are hard to remove

@Jojacky105

Replying to @user_2191554823 :

Oh ok i will try.

@12Sandwiches

Print Profile

0.2mm layer, 2 walls, 15% infill

Super detailed design, sits up perfectly and is wonderfully pretty. Had to be extra careful removing the supports, but I wouldn't expect anything else with such a delicate print! Thanks for the upload!

@user_335676612

Print Profile

0.2mm layer, 2 walls, 15% infill

Beautiful and easy to print!

@user_2843985076

Print Profile

0.2mm layer, 2 walls, 15% infill

Removing the supports causes breakage

Support Issue:Removing the supports causes breakage

Show original

@mak3m3s0m3thing

Print Profile

0.2mm layer, 2 walls, 15% infill

did another print in crystal and upscaled it very beautiful however still needed to be cautious with support removal

@mak3m3s0m3thing

once upscaled was a bit more sturdy however still had to be extra careful with removal of supports, still consider this a magnificent print just have to be careful and patient not to mention upscaled.

@Milos258

Print Profile

0.2mm layer, 2 walls, 15% infill

I had a problem with the supports, but after a slight correction and increasing the overall model size by 10%, it's now fine. The result is surprising, even though I used draft quality.