Gridfinity for MICKE drawers (BINS)

Gridfinity system optimized for IKEA MICKE drawers. 

Be aware: This system uses a different grid size than original Gridfinity system.

To use as much space within the Ikea Micke drawer, the grid was modified to 39x39mm size and height of 37mm.

With this change 6x9 grid fits within the drawer (with 12mm left in the back). You can fill the space in the back with a filler if you dont use base grid. Of course with base grid all bins stay in place and won't move to the back of the drawer.

All bins have stackable lip and it is possible to fit second bin within the drawer.

All the sizes of BINS are available as individual plates grouped by width:

• W=1: x1
• W=2: x1, x2
• W=3: x1, x2, x3
• W=4: x1, x2, x3, x4
• W=5 : x1, x2, x3, x4, x5
• W=6 (full drawer width) :  x1, x2, x3, x4, x5, x6  ← These works with sliders (see my other model)

Please select one of the printing profile to get all of the BIN sizes.

Go to my profile or follow below links to get other parts of the system:

• Baseplates: https://makerworld.com/en/models/1097035#profileId-1091566
• Inserts for Bins: https://makerworld.com/en/models/1073850#profileId-1064259
• Sliders: https://makerworld.com/en/models/1073879#profileId-1064288