Saint Valentine's Bookmark
Print Profile(1)
Description
Enjoying this project? Consider supporting me on Ko-fi!
>>> https://ko-fi.com/boardgamerdimontagna <<<
Lovely bookmark with Saint Valentine's quote.
Give it at your special person!
You can find the image at: https://creazilla.com/it/media/silhouette/2123/bacio
Autor: Natasha Sinegina
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 50x178.35mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 1.8mm and the Actual Depth is 1.8mm
Filaments Used:
PLA BambuLab Basic Pink Transmission Distance: 8
PLA BambuLab Matte Ivory White Transmission Distance: 4
This print uses 2 unique filaments
Swap Instructions:
Start with Pink
At layer #11 (0.96mm) swap to Ivory White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)