Gridfinity 1x1 - BambuLab A1 - A1 Mini Tool holder

I designed this to accommodate the acquired / printed tools for maintaining my BBL A1 Mini but it could be useful for other BBL printers.
The section with the “X” Pattern is designed to hold the BBL Lubrication Oil Tube either right-side up or upside-down depending on your preferences or needs.
Printed and designed many iterations dialing in the tolerances so the tools are not too tight and not too loose.
Tested with PLA and PETG. Magnets are standard Gridfinity 6x2mm.

Tools showcased in this bin:

- Hex Driver with swappable bits:
https://www.aliexpress.com/item/1005005730408630.html

- PTFE / Bowden Tube Removal Tool:
https://makerworld.com/en/models/79328

- A1 / A1 Mini X, Y, Z Rail Lubrication Tool:
https://makerworld.com/en/models/666874

- BBL Grease:
https://store.bambulab.com/products/lubricant-grease?id=539954789157224450

- BBL Lubrication Oil:
https://store.bambulab.com/products/lubricant-oil?id=539955238303473666

- BBL Nozzle Cleaning Tool (Came with my A1 Mini)

Let me know your thoughts! :)