Deburring Tool Case by 3D.Hrrsn

3D.Hrrsn

Tools>Organizers

IP Report

Print Profile(3)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.16mm layer, 2 walls, 15% infill

Designer

2.5 h

1 plate

4.8(98)

With text, 0.16mm layer, 3 walls, 10% infill

2.6 h

1 plate

5.0(14)

A1/A1 Mini - 0.16mm layer, 3 walls, 15% infill

2.7 h

1 plate

5.0(5)

Open in Bambu Studio

Boost

819

2001

149

108

1.1 k

790

Released

Description

A small tool case to hold a standard hexagonal shape deburring tool (12mm wide across flat faces) and up to 10 deburring tool bits.

The case rotates around itself to make a stand to display the tool / bits and give easy access when in use.

I've updated the model to include some small handles at the end to ease with opening the case, they're not shown in my print but you can see them in the CAD screenshot.

To assemble simply attach the lid to the base unit by inserting the cone shaped hinges on the lid into the corresponding holes on the base.

Update 17/02/2025

I needed somewhere to store my case when not in use to free up some space on the desk. I've put together a simple holder to attach it to an Ikea Skadis board, you can check it out here if it might be useful for you too!

https://makerworld.com/en/models/1121192

deburring

deburring tool

deburring holder

deburring tool holder

deburring tool case

tool case

case

Comment & Rating (149)

@JaegerMEIER

Print Profile

0.16mm layer, 2 walls, 15% infill

Flawless print and excellent result! It would only have been perfect if one didn't always have to remove the blade from the deburring tool… But otherwise top-notch, and thanks for sharing! 😎👍

Show original

@alexghrrsn

I'll probably end up uploading a V2 in the future so I'll make sure to include some extra headspace so you can keep a blade attached.

@pomagadelko

Replying to @alexghrrsn :

yes, please do this, i'm waiting for it :D

@JaegerMEIER

Replying to @alexghrrsn :

That would be fantastic, until then, V1 will suffice… 😎👍👍👍

(Edited)

Show original

@a.schmidt71

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

I slightly modified the model in the slicer I scaled it in length and added a modifier This allows me to store the deburring tool including the blade It is a fantastic model Thank you for your work

Show original

@alexghrrsn

Wonderful that you liked it Your modifications also seem to have turned out splendidly

Show original

@a.schmidt71

Boosted

Replying to @alexghrrsn :

Thank you for your message Yes, the model turned out superbly I scaled this by 20 mm in length and incorporated a modifier at the top for the blade Thus, the tool including the blade fits perfectly into the model It is a small alteration, but with a significant impact

Show original

@Smokedog77

Print Profile

0.16mm layer, 2 walls, 15% infill

Came out great, looks great when using the carbon fibre build plate too. Thank you.

@alexghrrsn

I definitely need to get a carbon fibre build plate, yours came out so good. Glad you liked the print.

@3DOBJ

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

The build plate was NOT clean the first time so I gave a clean and reprint it

@alexghrrsn

Did you have trouble with all of the print sticking or just parts before the build plate was cleaned? Glad it came out okay the second time.

@3DOBJ

Boosted

Replying to @alexghrrsn :

yes i’d get warping with the two parts but it was my fault because didn’t clean the bed before printing. I did a second print from the printer itself with no problem after cleaning the plate. Makerworld don’t recognize that as a good print and didn’t let me put the 5 stars. sorry about that.

@DirkMG

Print Profile

0.16mm layer, 2 walls, 15% infill

Beautiful model, everything fits perfectly

Show original

@alexghrrsn

Danke

@BavarianLord29

Boosted

Excellent Piece I also created profiles to optimize performance and minimize potential errors

The designer has replied

Show original

@alexghrrsn

Thank you very much I am delighted you enjoy it

Show original

@user_217303648

Boosted

Print Profile

With text, 0.16mm layer, 3 walls, 10% infill

Thank you for the wonderful idea It was always in the drawer and thus order prevails Excellent Thank you also for the possibility to edit the lettering A friend also received a copy—it's called "Entgratinator" :D

Show original

@user_3829520148

Print Profile

0.16mm layer, 2 walls, 15% infill

everything fits well

@shadowy1991

Print Profile

0.16mm layer, 2 walls, 15% infill

printed it with bronze bambulab pla

@CelicaPetz

I’ve added a recess so the blades don’t need to be removed each time, and if the box were a few millimeters wider and longer, the ten replacement blades could be inserted without twisting—a superb box, but a few minor improvements are needed, four stars… a boost is forthcoming if this is fixed The box itself is great 👌 it just needs to be enlarged by a few millimeters, including a negative model; you pay attention to the opening, but often the box is opened upside down, and the blades fall out; these are my tips for you, examples are observable in the photos (optionally, it would be possible to use magnets, e.g. 1x3mm, so that the blades could have a better hold?)

(Edited)

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Ikea Skadis Deburring tool holder

Ruben

Hand Tool Organizer

Edh329

404

144

Gurio instrument

X7K4U

The Best Cardboard Perforator/Perforation Tool

Tim Nummy