Stronger Design for the Keyrambit Keyspinner.

This is version of the Keyrambit is made to use with bearings (6703ZZ bearings).

These are the ones I used: https://www.amazon.com/Section-Bearing-Shielded-Bearings-17x23x4mm/dp/B07RYMDGTG/ref=sr_1_4?crid=ALODYUKAS7ON&keywords=6703zz+bearing&qid=1703434407&sprefix=6703%2Caps%2C248&sr=8-4

Bearing should snap in snuggly. If it does not stay in place, print smaller and use a heat gun to heat it before setting the bearing in place.