Summary

Housing for a D-Size Speakon (female) Connector with holder.

Use a Maximum of 0.1Resolution for the Squeezable-Parts!

The Holes at the Holder are 3.3mm.
The gap between the Holdingplates is 2mm. Only on "SpeakonBodyRightSideHolder.stl" it is 1mm!
Use screws: 3mm x 10mm to get the plug and the Cover fixed

Maximum Cable-Diameter for the Covers is 8mm!

Ask me for more solutions of the holder...

I use the Speakon-Connectors in my Camping-Caddy. The wooden Boxes i build for the Camping interior are also with Light etc.. To get the boxes in Wintertime out of the Car i searched a solution to do this in a save and easy way. So i found the Speakon-Connectors. If you want to use it for this u should be sure the Ampere is not to high for this connectors!!! I only have small things on it like LED-Lights and a Chargers for Handy and GoPro etc...

Print Settings

Rafts:

No

Supports:

No

Resolution:

1,5

Infill:

80