Sanding Stick Bambu Style by Regarnogal

Regarnogal

Tools>Hand Tools

Print Profile(9)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

NO Logo / fast 0.2mm layer, 2 walls, 15% infill

Designer

27 min

1 plate

4.9(115)

0.2mm layer, 2 walls, 15% infill

Designer

40 min

1 plate

4.9(93)

Cut in 2 pieces, BRIM, no logo 0.2mm layer, 15% infill

Designer

32 min

1 plate

4.9(9)

BRIM 0.2mm layer, 2 walls, 15% infill

Designer

41 min

1 plate

5.0(6)

Click to see more

Boost

525

1127

273

1.6 k

1.7 k

Released

Description

simple sanding stick to rework printed parts much easier.

added Bambu Logo to better fit the Maker World :D

Need a sanding paper of

1,5 cm width

14 cm length

Also have a look on the bigger Version with 2,5 cm:

Sanding Stick Bambu Style V2 (Big version) by Regarnogal - MakerWorld

Details for this Version:

tick_width_in_millimeter = 15
base_height_in_millimeter = 12
base_length_in_millimeter = 50
end_1_option = wedge
end_1_height = base_height
end_1_wedge_angle = 23
end_1_wedge_round_tip_diameter_in_millimeter = 2.0
end_2_option = round
end_2_height = base_height
end_2_wedge_angle = 10
end_2_wedge_round_tip_diameter_in_millimeter = 3.0
screw_thread_dia_in_millimeter = 6.0
screw_head_dia_in_millimeter = 12.0
screw_thread_hole_dia_in_millimeter = 6.4
screw_hole_dia_in_millimeter = 6.6
screw_head_space_in_millimeter = 15.0
screw_head_teeth = 8
extra_screw_head_height_in_millimeter = 0.0
max_thread_height_in_millimeter = 3.5

Comment & Rating (273)

@WorldInScale23

Print Profile

0.2mm layer, 2 walls, 15% infill

love the design! it works very well!

The designer has replied

@Regarnogal

@Worldinscale23 Thank you for sharing! ;) May i ask you if i can use your Picture within this Profile? i realy like it 😊

@WorldInScale23

Replying to @Regarnogal :

sure!

@dcappello

Print Profile

0.2mm layer, 2 walls, 15% infill

Handy little sanding block - printed in PLA Tough by Bambu on X1C .16mm layer. Thanks for the design and sharing. (ps any plans for one with a 25mm width for 1" sanding strips ?)

The designer has replied

@Regarnogal

I will try to create one and upload it here 😉👍🏻

@Regarnogal

@dcappello i have uploaded a 25mm Version, maybe it fits your needs ;) https://makerworld.com/en/models/171216#profileId-187972

@thomas.leiner

Print Profile

0.2mm layer, 2 walls, 15% infill

Praktischer Helfer. Gewinde funktioniert top.

The designer has replied

@Regarnogal

Danke fürs teilen! ;)

@RabidRabbit

Many thanks for the model. Printed these in Overture Super PLA+ light gray with Overture PLA+ digital blue for accent. I enlarged the logo and centered it and added labels to the screws. the stick and clamp were printed with .4 while the screws were .2 with hilbert curve and one wall on the bottom surface.

(Edited)

@notforyou

Print Profile

NO Logo / fast 0.2mm layer, 2 walls, 15% infill

Nice and fast, good tool

The designer has replied

@Regarnogal

looks good 👍🏻 thanks for sharing!

@rpinerd

Print Profile

0.2mm layer, 2 walls, 15% infill

Print surface leaves something to be desired, maybe an ironing pass would help? Or even printing logo-down and just having supports? But the threads work and it came out clean enough to be usable 😊