No Print Profile yet. Add one to earn points.
Babel Fish Hue Forge Painting. This one takes two AMS, or requires changing the Colors in the AMS strategically, or just manually swapping. This uses 6 colors.
I wanted to upload a 3mf for this print, but makerworld won't let me, and times out while trying to slice it….
But it does slice just fine, I think it does take a lot of time tho
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA Hatchbox PLA Pro+ Red Transmission Distance: 5.3
PLA PolyLite Azure Blue Transmission Distance: 3
PLA BambuLab Basic BambuLab Green Transmission Distance: 8
PLA PolyLite Purple Transmission Distance: 0.5
PLA BambuLab Basic Yellow Transmission Distance: 6
Swap Instructions:
Start with Black
At layer #14 (0.68mm) swap to Red
At layer #29 (1.28mm) swap to Azure Blue
At layer #37 (1.6mm) swap to BambuLab Green
At layer #51 (2.16mm) swap to Purple
At layer #52 (2.2mm) swap to Yellow for the rest.