Lead screw cleaning tool
Copyright Claim
Lead screw cleaning tool
Boost
33
60
26
Print Profile(1)
0.16mm layer, 2 walls, 15% infill
Designer
56 min
1 plate
Open in Bambu Studio
Boost
33
60
26
2
250
140
Released
Description
This tool helps in cleaning the lead screws of you printer so that new clean grease can be applied. It is for 8mm rods with 2mm spaced threads, these are in many printers. It snaps on the rod and then you move the plate up and down to clear the groves. I place a small lint free cloth between the rod and the tool so that fibers are not left behind.
Comment & Rating (26)
All
Gray PETG, worked as advertised
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
Nice
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
perfetto funziona bene
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
Very useful!
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
perfetta
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
Thanks for sharing your model. By any chance, do you know the link for a proper maintenance. Have a great day?
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
Works as advertised, thanks!
0
Reply
print on a Carbon X1C with PLA.
perfect.
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
Printed in PETG the threads cam put a little distorted and because of the small width it didn't remove much of the old grease.
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
Macht was es soll. top
0
Reply
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld