After so many people apparently liked my Spiderman, I picked another one and hueforged it. Here it is, have fun with it!

In order for the Hueforge images to be as good as shown, it is absolutely necessary to follow the steps or you can of course use a different color, the result will of course be different.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Black Transmission Distance: 0.3
PLA Blue Transmission Distance: 2
PLA Red Transmission Distance: 5
PLA White Transmission Distance: 5

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

Swap Instructions:
Start with Black
At layer #5 (0.48mm) swap to Blue
At layer #9 (0.8mm) swap to Red
At layer #14 (1.2mm) swap to White for the rest.