Ford Model A Lightbox
Copyright Claim
Ford Model A Lightbox
Boost
11
14
3
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
4.8 h
2 plates
Open in Bambu Studio
Boost
11
14
3
0
15
7
Released
Description
A Ford Model A designed in Fusion 360. There is the main body which is printed face down at a .2 layer height, then the back panel which is printed face up at the same layer height. The back panel has two cutouts for the USB-C connected to power the internal LEDS as well as a switch to turn the lights on and off. Links for the USB-C connector, Switch, and LEDS I used are below.
Link for LEDs, Switches, and other components used: https://bit.ly/m/Additive-Imprints
Documentation (1)
Assembly Guide (1)
Assembly Guide_f18c8341-6381-49cb-9897-42b97aafc2ed.pdf
Comment & Rating (3)
All
Are you able to cut and resolder these led strips? or are they one time use?
The designer has replied
0
Reply
All of the LEDs I use can be cut and resoldered. The distance between cut marks may vary but they can all be custom sized.
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
No more
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld