☕Checkout my other Nespresso designs : https://makerworld.com/en/u/3864875302/collections/90969
Fast and economic Nespresso Vertuo capsules tower (vase mode) :
A cutting jig is provided to help you to cut the nespresso boxes, to create the fancy labels. Use a sharp pencil or a lead holder pencil, and a ruler/knife to get a clean cut.
It seems different cup size boxes have some minor differences, I made templates for 40,80, 150, 230 and 355ml boxes. I had a 535ml capsules box but there is no roasting indicator.
However, you can use any template on any box, just manually center the template around the label you need to cut, it's just a little bit easier and quicker with the exact template.
The body towers are made to be printed in vase mode so it doesn't require lot of filament. Scale on Z axis the height you want, I suggested you those heights depending the number of capsules you want to stack :
If you want to stack multiples towers, specially if you have a small build volume, use this coupler so you can build the tower's height you want!
The print profile for the base include a color change, if you want one color only remove the color change trigger in the preview windows, or simply select the same ams slot for both colors in print dialog
The print profile for the towers is optimized for the model, you just need to set the Z height if you want (220mm by default, for 4 capsules)
Note: This tower doesn't have a rotating feature, I used a turntable to show it at 360°, look at the carousel version.
Update 2024-01-03: Added a 40ml capsule cutting jig and rename 230ml jig to 230-355ml because it is the same jig for both sizes