Print Profile(1)
Description
Optimized for 3D printing with a amazing depth of field.
The Glowing series is optimized for use with glow in the dark filaments for a mesmerizing effect.
Charge the pictures with UV light for the most optimal effect.
There will be 2 print profiles available.
200x200 is optimized for x1c, p1s, p1p
150x150 is optimized for A1 mini.
Frames for both sizes can be found in my uploaded models.
Pictures can be printed with out AMS by following the print instructions below.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
Bambu Lab PLA Matte Charcoal
Bambu Lab PLA Glow Blue
Bambu Lab PLA Glow Orange
Bambu Lab PLA Glow Yellow
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Bambu Lab PLA Glow Blue
At layer #10 (0.88mm) swap to Bambu Lab PLA Glow Orange
At layer #15 (1.28mm) swap to Bambu Lab PLA Glow Yellow for the rest.
Art generated with midjourney and optimized for 3D printing with Hueforge.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (11)