Bambu Hot Ends and Nozzles Gridfinity Storage Bin

This is a Gridfinity compatible hot end, nozzle, wires, grease, etc. bin/storage container. It is compatible with the AMS Riser V2 Remixed by maCyo42 - MakerWorld and the Gridfinity-based drawer profile on that page, which is based off the Gridfinity Riser Drawer Remixed by TheTimminator - MakerWorld. Please give TheTimminator a download/boost if you use either his drawer or the Gridfinity-based drawer profile found on the AMS Riser V2 page. 

For any Hot Ends that you use, you will want to remove the fan from the hot end (see the pic of all the nozzles/hot ends in the bin/base). There are separate spots for fans (and their wires). If you want to store extra nozzles and the other parts needed to assemble a hot end, there are separate bins/spots in this model for thermistors, wires, etc. Nozzle heater clips/screws can be house in their own bin/spot (labeled), and there are spots for extra silicone sleeves (Nozzle Covers). 

The 4x4 model consists of 4x dedicated spots for extra nozzles, 3x spots for assembled hot ends (with fans removed) and their removed fans, 4x spots for extra silicone sleeves/nozzle covers, 1x spot for thermal grease, 1x spot for screws and nozzle heater clips, and 1x spot for thermistor sensors/wires/etc.

The 2x4 model consists of 3x spots for extra nozzles, 2x spots for fans/their wires, 3x spots for silicone sleeves/nozzle covers, 1x spot for screws and nozzle heater clips, and 1x spot for thermal grease. The 2x4 design does not have a dedicate space for thermistors or nozzle heater wires, but those can be folded up and stored in the fan wire areas if needed.