Crash bandicoot Special crates
Print Profile(1)
Description
Introduction:
Crash and Aku crates made with PLA wood :)
Printing details:
Layer height: 0.16mm
Material: Prusa PETG: Bambulab PLA Wood Clay and lots of PETG.
HOW TO PRINT THE LOGOS WITH ONE AMS?
First, download the .3mfs for the head and Aku logos as shown below:
AKU PAUSE 1
Then add a pause at layer 14 as shown in the screenshot below, during that pause you will switch the following filaments
Brown -> Green [CHANGE]
Black -> Red [CHANGE]
White -> White [NO CHANGE]
Yellow -> Yellow [NO CHANGE]
Your printer may be already using one of the colors, in that case set the hotend to a purging temperature, manually cut the filament using the lever, retract a bit using the extruder controls on the touchscreen, swap the filament spool, then manually feed and extrude a bit to purge the color.
AKU PAUSE 2
Add a pause at layer 19 as shown in the screenshot below, during that pause you will switch the following filaments
Green -> Blue [CHANGE]
Red -> Red [NO CHANGE]
White -> Purple [CHANGE]
Yellow -> Yellow [NO CHANGE]
CRASH PAUSE 1
Add a pause at layer 16 as shown in the screenshot below, during that pause you will switch the following filaments
Orange -> Red [CHANGE]
Assembly:
Glue the corresponding logos to their crate, I recommend CA glue, wait for the glue to set before doing the other sides :)
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (14)