BMW Lightbox
Copyright Claim
BMW Lightbox
Boost
47
98
12
Print Profile(1)
0.16mm layer, 2 walls, 15% infill
Designer
9.8 h
3 plates
Open in Bambu Studio
Boost
47
98
12
4
207
135
Released
Description
This is a BMW Lightbox that can be illuminated with basic electronics
The electronics are very simple and can be done without any soldering using the components below.
Power Switch https://www.amazon.com/dp/B07S1MV462?psc=1&ref=ppx_yo2ov_dt_b_product_details
LED Strip https://www.amazon.com/dp/B075R4X1XL?ref=ppx_yo2ov_dt_b_product_details&th=1
Power adapter https://www.amazon.com/dp/B08FJ7KT4X?ref=ppx_yo2ov_dt_b_product_details&th=1
Quick Connectors kit https://www.amazon.com/dp/B08BZ972B5?ref=ppx_yo2ov_dt_b_product_details&th=1
You can use any LED strip that is 12V, the one I linked has presoldered wires.
Comment & Rating (12)
All
Print Profile
0.16mm layer, 2 walls, 15% infill
Merci j'ai ajouté 1 bouchon sur le trou le'plus gros
(Edited)
0
Reply
Boosted
Print Profile
0.16mm layer, 2 walls, 15% infill
good print
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
Slight blue purge failure on white
0
Reply
How does one wire in the switch? Thanks in advance.
The designer has replied
0
Reply
the positive wire from the LEDs goes to the middle connector on the switch, then a wire goes from the outside connector on the switch to the positive connection on the power plug. the connection to the switch uses spade connectors.
0
Reply
Boosted
Print Profile
0.16mm layer, 2 walls, 15% infill
imprimé avec succès
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
alles perfekt funktioniert
0
Reply
I think there is necessary to apply gluestick on the coolplate otherwise when removing the different colors separate :(
Or maybe do you use pei textured plate?
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
Strength Issue
Other Issues:all différents color parts separating printed 3 Times samedi problème.
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
0
Reply
License
This user content is licensed under a
Creative Commons AttributionRelated Models
© 2024 MakerWorld