Snake - HueForge
Print Profile(1)
Description
Do NOT adjust the thickness (Z) in your slicer!! The layers will not come out right. You CAN adjust the other dimensions (X,Y) though to make it bigger or smaller, just not the thickness.
A1 Mini Note: You can still use this (or any of my HueForge models) on your A1 Mini, all you need to do is scale down the X and Y so it fits on your bed.
These were my settings and colors for my print that you see in the picture. Your results may vary depending on the filament you use and if you have your own HueForge profile saved with different settings.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Nozzle: 0.4
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 1.2mm
The Max Depth is 3.2mm and the Actual Depth is 3.3mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Gold Transmission Distance: 5
PLA+ IIID Max Vanilla Cream Transmission Distance: 7.8
PLA Sunlu Meta White Transmission Distance: 8
Swap Instructions:
Start with Black
At layer #16 (1.36mm) swap to Gold
At layer #21 (1.76mm) swap to Vanilla Cream
At layer #25 (2.08mm) swap to White for the rest
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (9)