Picked up this till or cash register if you're not from the UK like me :P, with a missing drawer key someone had wedged the drawer open and it did work, but could not be locked.
Replacement keys can be quite expensive for what they are, so I found a google image of the key and put it through a image to stl converter and cleaned it up, with some trial and error on the dimensions I finally came out with a working key.
The thicker key top works best as it's more durable and feels less like it'll snap
These can be printed in PLA but you may only get a few turns out of them before they break, just don't break it while it's in the lock.
Ideally needs to be printed in PETG or ABS, ABS is a pain to print IMO, I used PETG with no real issues.
I'd recommend a 100% infill with whatever the strongest pattern your slicer has, I used cura with the cubic pattern for added strength
Printer:
Jazla
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2
Infill:
100
Filament: amz3d PETG
Notes:
Reccomend printing in PETG or ABS, PLA will work but not for long