Hi, since my Christmas tree stand was lost, I decided to make my own.
I decided to share it because maybe someone else will encounter a similar problem.
The stand is solid and stable. It is very easy to print.
Supports are only required for the legs of the stand with water container.
You can use your own print settings, but I recommend a layer height of 0.2mm.
The legs may fit snugly in the main body, but that's how it's supposed to be.

Inner diameter of the stand: 60mm
Diameter of the entire structure: 398mm
tree trunk fastened with wood screws with a maximum diameter of 5 mm with a conical head.

Feel free to download.
If you like my design, leave a thumbs up:)