Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Grey Transmission Distance: 2
PLA+ Sunlu White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Grey
At layer #19 (1.6mm) swap to White for the rest.
Has a 3mm border starting from layer #28.
Prints well even in ludicrous mode on the P1P.