Hueforge Model of one of Jujutsu Kaisen's most famous panels - Satoru Gojo the Honored One.
Requires 3 colours (white/grey/black) to print.
Pictured print was printed in Sunlu PLA+.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Grey Transmission Distance: 2
PLA+ Sunlu White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Grey
At layer #21 (1.76mm) swap to White for the rest.
.3MF file made using Orca Slicer and printing on a P1P.