Cable management is a sizing problem.

Every cable duct you can buy is a compromise: too wide for the skirting board, too flat for the plug, exactly 80 mm too short for the wall. So the cables stay where they are — on the floor, behind the desk, in the corner you stopped looking at.

LED strips have the same problem in reverse: bare adhesive strips that sag, peel off and never sit straight.

Don't search for the right duct. Generate it.

The CableDuct & LED Channel Generator is a parametric configurator that runs in your browser. Enter your dimensions — width, height, length — and it produces exactly the part you need, millimeter-precise, as a print-ready file. Configured in seconds. No CAD, no remodeling.

Try it yourself — right now, free, at cforms.org.Don't take my word for it. The configurator is already live: open cforms.org, set your dimensions and watch the part appear in your browser in seconds — no login needed. You only need an account to download the print files.

Now it branches, too: T- & X-junctions

Real cable runs don't follow one straight line - they split. So the generator now builds true T- and X-junction pieces, straight from your configuration.
 

Add as many branches to a duct as you need - T-left, T-right, or a full X-crossing - positioned exactly where you want them. Every branch can have its own width, from 20 to 120 mm in 1 mm steps: run a wide main duct and split off a slim one for a single cable - one part, no adapters.
 

The covers keep working: the main cover slides straight through the junction, the side covers butt up cleanly-everything still slides on after the ducts are mounted. 

Each branch ends in the standard connector, so side ducts snap on exactly like any other segment - and side ducts can carry their own junctions, for a whole branching network.
 

Every download with junctions also includes a dimensioned, blueprint-style layout plan (PDF), so you can generatethe matching side ducts any time later without measuring twice.

One generator, every part you need.

• Straight ducts — any width, height and length
• Inside & outside corners that actually match your duct
• Snap-on covers — no screws, no glue
• End caps for clean terminations
• Wall & cover cutouts — for sockets, switches and cable exits
• Socket covers that integrate the duct into the wall plate
• LED channels that hold the strip straight and diffuse the light

Every part is generated to fit every other part. That's the point of a system.

Fresh off the plate.

Everything you see here is printed, snapped together and in use — not a render. The parts are designed for clean FDM printing: flat on the plate, no supports needed for the standard profiles.

Light the edge, hide the strip.

The LED channel profiles hold standard LED strips straight, route the wiring inside and give you a clean line of light instead of a glued-on afterthought.

Choose your tier.

Every tier gives you the full generator. Lifetime access is exclusive to this campaign.

• Explorer — try it for a year, 5 exports per month, personal use.
• Maker — lifetime access, 30 exports per month, personal use.
• Merchant — everything in Maker, plus a Commercial License: sell the parts you print. (Most popular.)

Built for makers — and sellers.

With the Merchant tier's Commercial License, you can sell the cable ducts and LED channels you print. One generator, unlimited custom products to make and sell.

Good to know.

• Works with standard LED strips.
• Output: print-ready STL and Bambu 3MF — plate layout included.
• Prints on any FDM printer; standard profiles need no supports.
• Personal use on Explorer & Maker; commercial use on Merchant.

Back it now - and help decide how far it goes.

The generator works today - I use it for my own walls, desk and workshop. Backing it on MakerWorld is what turns it into a polished, full release for everyone: more profiles, more cutout types, more LED options, and long-term maintenance. Early-bird pledges are limited - grab yours while they last.