Sewing Machine Bobbin - Free 3D Print Model

Search models, users, collections, and posts

Remixed by

AmyMakes

Hobby & DIY>Other Hobby & DIY

IP Report

Print Profile(1)

All

P1S

A1 mini

X1 Carbon

H2D

X1E

P1P

H2D Pro

H2S

P2S

H2C

X2D

A2L

4 bobbins - 0.2mm layer, 2 walls, 15% infill PETG

26 min

1 plate

4.8(49)

Open in Bambu Studio

Boost

325

1038

1.2 k

877

Released

Description

Printed in PLA

I have used 50-100 infill and found both work fine

Comment & Rating (68)

@PlayPausePrint

Boosted

Thank you!! I needed more bobbins, and these work perfectly. Other off brand bobbins (not 3d printed) would fit into the machine (Brother innovis f420) to sew with, but not the bobbin winder - these fit for both.

@marco117

Print Profile

4 bobbins - 0.2mm layer, 2 walls, 15% infill PETG

Fast to print. Fits very well.

@CarleeC

Print Profile

4 bobbins - 0.2mm layer, 2 walls, 15% infill PETG

perfect thanks

@user_160518417

Print Profile

4 bobbins - 0.2mm layer, 2 walls, 15% infill PETG

made for my science classroom. We used for small pulleys

The profile uploader has replied

@PlayPausePrint

Boosted

amazing! love it

@psstump

What class bobbin is this, or what machine does it fit?

The designer has replied

@AmyMakes

Not sure about class - I just took measurements of my girlfriend's bobbin. I know her machine is a Singer but afraid I can't be much more help than that.

@PlayPausePrint

Boosted

They fit my Brother Innovis F420 which uses Class 15 bobbins/11.5mm bobbins

@AdrienS

Print Profile

4 bobbins - 0.2mm layer, 2 walls, 15% infill PETG

To be improve PETG parameters. To be check if it work in real life

The profile uploader has replied

@PlayPausePrint

Boosted

I only print these in PETG, did you have an issue?

@AdrienS

Replying to @PlayPausePrint :

I used PETG HF, looks not perfect, but maybe because of the material. Maybe should have down a little the temperature.

@polished_prints

Print Profile

4 bobbins - 0.2mm layer, 2 walls, 15% infill PETG

Perfect! Was using it for a water well project (not sewing), and I'm going to still test it. But they both fit into each other smoothly, and very hard to separate again. You don't have to print it with PETG, PLA works very good too. I only printed one of the stls since I don't need all of these. Awesome design overall!