airtag battery extender (AA)
Print Profile(1)
Bill of Materials
- 0,22 mm² Kabel x 1:
- 0,6 mm² starrer Silberdraht ohne Isolierung x 1:
- Batteriekontakte 12 mm x 12 mm x 2: z. B. https://amzn.eu/d/aG3Er7W
- 12 mm runde Magneten, Dicke < 1.82 mm x 8: z.B i. e. https://amzn.eu/d/13S6O88
Description
Update 2025-03-16:
The print profile erroneously included support; it has now been disabled.
This model serves to combine an AirTag with two AA batteries in a single housing.
The AirTag does not need to be disassembled to connect it to the batteries, nor is soldering wires directly to the AirTag required.
Both cables are routed through the housing and are therefore invisible.
The tolerance between the lid and the component receptacle is very tight, ensuring the lid remains secure even without the optional magnets.
The project includes two lids; one features openings to enhance AirTag signal reception.
Housing dimensions: 74.5 x 74.5 x 21.5 [mm]
I recommend using this AirTag adapter: AirTag Bayonet Adapter.
The included print profile is finer and yields superior results.
License
Comment & Rating (22)