KrakenWorks3D

cover

Capture1_63044bc2-6f34-424a-9c4b-04e49afe2414.png

D03F27A2AE4B_1701109140664_3ba93703-fb80-49d7-b923-f90e864d2f0e.jpg

plate_1.png

8slawek8

IMG20231213074552_9089bd62-0db7-4c34-90a2-47b532e33022.webp

-0.20m layer height,-no support,-2x wall loops,-3x top&bottom shell layers

0.2mm layer, 2 walls, 15% infill

hubuki

PXL_20240118_232914026_0f4c2224-a8a4-4f0c-ad0f-550d08b82052.webp

user_3961176353

photo_2024-04-13_16-05-48_317248f9-f21e-46d3-aec4-9e88bfe72e10.webp

plate_1.webp

photo_2024-04-13_16-05-48 (2)_2a3a7daf-7296-4f1a-a22d-879d426e46ed.webp

Profile for printing in ABS, which makes the model more resistant to water in the long run.<ul><li>Gyroid infill</li><li>Initial layer speed reduced for better adhesion</li><li>In case of adhesion issues add brim</li><li>Printed with Textured PEI plate on X1C</li></ul>

ABS (more water resistant) 0.2mm layer, 2 walls, 15% infill

Shawn

I need one for two sponge. so I made a bigger one

Doubled size 0.2mm layer, 2 walls, 15% infill

dambusm

IMG_8811.jpeg

2024-09-02_73fe54fd81f8

Scaled down to 70% to fit smaller sponges (90x70 mm).0.2mm layer height, 15% infill.Seams aligned on the bottom.

70% size, for smaller sponges. 0.2mm layer

I have created a Sponge holder V2.  Check it out here: https://makerworld.com/en/models/968023#profileId-939093&nbsp;We needed a place to allow our dish sponge to dry.&nbsp;So… Here it is.&nbsp;I recommend printing this on the back face (shown below) requiring no supports.. I printed this at .2 mm layers.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000090346/design/2023-12-11_44d42e923cfce.jpg"></figure>&nbsp;

Sponge Holder

ASIA

Print Profile(5)

Description

Comment & Rating (464)

License

Related Models