80mm HEPA + Charcoal Filter (for A1M Enclosure)

This is a remix of this model.

Can technically be used with any enclosure that has 80mm fan mounting holes, but is primarily intended for the A1M Enclosure by Fabian Haensch.

This works great to significantly reduce / eliminate PLA/PETG smells, I have yet to try it for other filament types.

CHANGES

• All parts can now be held together with D6x3 magnets, same as the ones on the A1M Enclosure. Tight fit, no glue required
• HEPA part
  • Small changes to airflow
  • Changed sizing so the HEPA filter fits better

PARTS

• HEPA Filter - https://vi.aliexpress.com/item/4001246533591.html
• Charcoal Filter - https://vi.aliexpress.com/item/1005005848803196.html
• Magnets D6x3 - https://vi.aliexpress.com/item/1005007557448156.html
• Brass Inserts M3x4 - https://vi.aliexpress.com/item/32890237459.html (need to be inserted with a soldering iron)
• M3 Screws - https://vi.aliexpress.com/item/32810872544.html (I'd recommend at least 10mm, this worked for me with a 3mm acrylic panel sandwiched between the part and fan)
• 80mm Fan - https://smile.amazon.com/dp/B00G059G86 (you don't have to use this one, but this model has been working well for me)