5x5 Single Lid - Modular Rack System for Gridfinity Drawers
Copyright Claim
5x5 Single Lid - Modular Rack System for Gridfinity Drawers
Boost
8
18
8
Print Profile(1)
0.2mm layer, 2 walls, 5% infill
Designer
5 h
3 plates
Boost
8
18
8
1
94
126
Released
Description
Modular Rack System for Gridfinity Drawers
This is a completely modular customizable rack system for gridfinity drawers.
Please check out the overview page here to find the complete list of all currently available components.
5x5 Single Lid
This page contains all the required stl files to print a 5x5 Single Lid unit for a single tower rack.
Also included is a step file containig all the components for this unit.
Comment & Rating (8)
All
Looks great, especially printed in different colors :)
When printing on A1, the dovetails are very tight. Need a lot of work filing down, so they actually fit.
There is also a risk of de-laminating the topmost layer, when putting the 3 pieces together (due to tight tolerances).
Finally the screw elements could be trimmed down by 1.0mm height-wise. If you screw too hard again it can cause de-lamination of some layers. Superglue to the rescue ! :D
0
Reply
Print Profile
0.2mm layer, 2 walls, 5% infill
make sure that you check the parts and that they are face down. had the center part orent3d wrong and had to reprint. but works great.
0
Reply
Print Profile
0.2mm layer, 2 walls, 5% infill
works great
0
Reply
Print Profile
0.2mm layer, 2 walls, 5% infill
0
Reply
Boosted
Print Profile
0.2mm layer, 2 walls, 5% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 5% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 5% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 5% infill
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld