Print Profile(1)
Bill of Materials
Description
I put flies on the ends of the hands, so they can fly around as time passes!
Make sure your build plate is clean! The hands are very delicate. I ended up using glue stick on a smooth plate to make sure they stuck.
Assembly is fairly straightforward. Insert black rubber ring into recess in stand.
Then insert the clock module into the stand, with the battery facing down.
Then place the clock face onto the post, add the washer, and then the nut. Make sure the face is on straight, and tighten the nut. I just made it finger tight, but if you do use pliers or a wrench, don't torque it down too hard.
Place the cap over the nut and washer. It should be tight enough to bite into the threads and twist into place. Then add the Hour hand, and then the Minute hand. Make sure they both are pointing straight up at 12.
Set the time, and enjoy your clock! Thank you for checking out my model! Feedback and boosts are always welcome.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)