Metalkafa

double sided tape

cover

DRIFT.png

WhatsApp Image 2025-01-20 at 21.52.14.jpeg

plate_1.png

plate_2.png

2024-12-03_cbe61ed446f8e.gif

0.2mm layer, 3 walls, 20% infill

New top model update is here! Bearing circle is fitting better now. Still need glue for better connection. 0.12mm layer, 3 walls, 30% infill Print with PETG. No need for supports

0.12mm layer, 3 walls, 30% infill

drift 2.jpeg

New bottom model arrived!! Print without support. Use PETG filament.  0.12mm layer, 3 walls, 30% infill

user_4125850989

image0 (2).jpeg

A more suitable axle for 608 bearings

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you like my design, please BOOST me</boostcontent></boostme>This is a small inertia drift toy car ornament suitable for placing in a car. It can deflect the body according to inertia when turning. I used 608 bearings and some hot glue.  PETG or better condition filaments are recommended for sunlight. Front wheel should be at center of ball bearing

Drift car 

ASIA

Print Profile(4)

Bill of Materials

Description

Comment & Rating (180)

License

Related Models