Christmas Tree Bauble (Vase Mode / Normal Mode)

This model has a diameter of approx. 38mm.
I offer a larger model with a diameter of approx. 58mm here.
I offer a hook for attachment here.

I also offer a model in the shape of a Christmas tree.

There are two types of print profiles:

• Model in vase mode - lightweight, little material, no multicolor possible
• Model in normal mode - more material, but without support (only brim) and without a purge tower for multimaterial
  • here I have created a model with the ring, so you don't have to print it separately. You can select it
    and choose, for example, gold or silver. Entirely according to your own wishes

Vase Mode Model:
A lightweight, simple Christmas bauble, when printed in vase mode,
requires very little material and is very light.
At the top, I have shaped a small sphere for a ring for a Christmas bauble to enable attachment to the tree.
A hook can then be inserted there.
The bauble is only one wall thick, so you shouldn't expect heavy-duty performance from it.
In terms of stability, I would compare the bauble to a ping-pong ball.

For the model in normal mode, the ring is already included in the model.
However, the model is printed without infill. With two walls, the model is already very stable.
Thus, multiple models can be printed simultaneously (I have a plate with 6 pieces included).

Please leave a comment, a print profile rating, and pictures.
Check out my other models.
 

Powered by MakerWorld-Make My Vase (https://makerworld.com/makerlab/makeMyVase)