Obi-Wan Kenobi Lightsaber Hilt, Episode III
Print Profile(1)
Bill of Materials
Description
This is the lightsaber hilt of Obi-Wan Kenobi from Episode 3 (Revenge of the Sith), based on pictures of the Master Replicas version. The inside is hollow so that a battery and lighting can be installed if desired. The thin neck of the handle can be reinforced on the inside with a 10 mm steel tube. The buttons are also constructed in such a way that they can operate buttons built into the inside if desired. An M3x10 screw is required to mount the belt clip. It is necessary to drill into the booster with a 2.5 mm drill bit. The position of the hole is described in the pictures. The parts have been designed so that they can be painted separately and then assembled.
As the screw connection between the golden heat sink and the grenade section broke off too often due to the limited wall thickness, I replaced this with an adhesive connection.
Please have a look at the 3mf file or open it in Bambu Studio to see the optimal orientation for printing.
If you prefer the design from the Obi-Wan Kenobi series, you can do it with this emitter: https://makerworld.com/de/models/861059
The matching belt clip is available here: https://makerworld.com/de/models/848936
Boost Me (for free)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (33)