Star Wars Coaster Set
Print Profile(1)
Description
This is an awesome set of thick Star Wars coasters.
You can choose between 16 different coasters to print.
I have included a 8 coaster tray or a 6 coaster tray.
These can be decorated with with the included sides that you glue to the tray.
First glue the short ones and than the longer ones.
Print instructions:
Coasters:
Print at 100% infill with a layer height of 0.2mm with a base layer of 0.2mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Blue Gray Transmission Distance: 3.2
PLA BambuLab White Transmission Distance: 9.6
Swap Instructions:
Start with Black
At layer #16 (1.2mm) swap to Blue Gray
At layer #18 (1.6mm) swap to White for the rest.
Side Strips Tray:
Print at 100% infill with a layer height of 0.2mm with a base layer of 0.2mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Blue Gray Transmission Distance: 3.2
PLA BambuLab White Transmission Distance: 9.6
Swap Instructions:
Start with Black
At layer #6 (1.2mm) swap to Blue Gray
At layer #8 (1.6mm) swap to White for the rest.
All the designs i upload, i have to print first, and that's a lot of filament 😬 And filament isn't free..
So, if you like my work you could
buy me a coffee if you like. 😉
https://www.buymeacoffee.com/a.vdh_83
Or a donation via Paypal is also much appreciated.
https://www.paypal.com/donate/?hosted_button_id=3KZUPFUG4KLUL
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (208)