scorpio
Print Profile(1)
Description
Project: scorpion dani.hfp
Print at 100% infill with a layer height of 0.08 mm and a 0.16 mm base layer
The model is 176x176 mm in size
You can print with higher layer heights, keeping them below the minimum depth of 0.48 mm
The maximum depth is 2.2 mm and the actual depth is 1.6 mm
Filaments used:
PLA Protopasta White Purge length: 3
PLA PolyLite Black Purge length: 0.3
Generic PLA Violet Purge length: 5
Bambu Lab PLA Matte Ice Blue Purge length: 3.5
This print uses 4 unique filaments
Swap instructions:
Start with white
At layer #6 (0.56 mm), switch to black
At layer #9 (0.8 mm), switch to violet
At layer #16 (1.36 mm), switch to Ice Blue for the remainder
Boost Me (for free)
if you like my models, help me with a boost
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)