2BA Dart Tip
Print Profile(1)
Bill of Materials
Description
Modeled to fit 2BA threaded darts. So far, in my testing, PLA isn’t a great choice. I recommend TPU or PETG. The tip length is 25mm. Includes keyhole.
Boost Me (for free)
It costs you nothing, but allows me to keep making silly things 😗 I'm just a small fish on MakerWorld, so your boost goes a long way.
Print Time & Cost (With Overture Pink PETG on a P1S)*
*Above link is an Amazon Affiliates link. I get a couple of pennies if you click it ;)
| Usage | Est. Filament Useage | Est. Print Time | Est. Cost |
| Main Body (9 Darts) | 3.62 g | 37 min | $0.08 |
Print Settings
- Layer Height: 0.12 mm
- Wall Loops: 4
- Sparse Infill: 25% Gyroid. Grid is not welcome in this household
- Brim: Outer Only, 4 mm
- GO SLOW WITH YOUR PRINT SPEEDS
- Top/Bottom/Infill Surface Patterns: Hilbert
Support Me
If you dig this model, I'd sure appreciate it if you could kick me over a $1 so I can buy my partner the occasional bottle of wine for having to put up with my chaotic and messy hobbies: buymeacoffee.com/jordyjordy
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (58)